No 2 robertson square drive bits. specifications: • overall length=75 mm • overall length=3 inch • d=1/8 inch • d=3.
See offerTrend snappy robertson no2 driver bit - 150mm long 150mm long bit ideal for use with trend pocket hole screws and pocket hole jigs allows screws to be driven in easily at the correct angle when assembling pockethole joinery without the drill chuck ca....
See offerExtra long phillips screwdriver bits for use with trend snappy quick chuck. specifications: • ol=150 mm • size=phillips no.
See offerEspecially designed for routing corian which is used in many bathrooms and kitchens. for trimming bowls, trepanning and face milling.
See offerFor biscuit jointing of timber, man-made fibre and particle board with the router. the set includes three sizes of bearing which set the correct depth of cut for the three sizes available.
See offerSome ovolo cutters can be used with radius cutters, to make rule joints. specifications: • d=60 mm • c=27 mm • r=20 mm • ol=65.
See offerSaw tooth forstner bits are made from high grade carbon steel and meticulously heat treated. they cut fast, with the grain or across it.
See offerDown-cut spirals are ideal for routing small workpieces or for holding workpieces secure in vacuum jigs. down-cut pushes woodchips below the work.
See offerThese machine bits have two wings, two scribers and a centre point. tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density.
See offerA panel door set consisting of a easyset profile scriber and panel raiser cutter. supplied in a storage case.
See offerA range of small sized panelling cutters. ideal for veining and fluting applications.
See offerIdeal for edge of drawer fronts and cabinet doors. specifications: • d=13 mm • d2=1.
See offerThese specially designed machine bits have a specially designed form of scriber to allow use at high speeds. for recessing circular hinges.
See offerUseful for bevelling thick timbers. certain sizes can be used for jointing, boxes, pilasters and carcassing.
See offerThese slotters have a 12mm clear bore to enable them to be mounted at any position on the arbor in combination with spacers, with or without a bearing. specifications: • d=40 mm • bore=12 mm • kerf=6 mm • no.
See offerTwo flute for fine finish. specially ground for cutting acrylic.
See offerA double sunk bead with bearings fitted onto both shank and cutter, will create very attractive corner mouldings. specifications: • d=25 mm • c=22 mm • b=16 mm • r=5 mm • ol=73 mm • shank diameter=1/4 inc....
See offerA keyhole recess for picture hanging flush to the wall. ref.
See offerLarger bearing removes the flat. supplied with two bearings.
See offerSelf guiding classic cutters with facility to change profile by fitting larger bearing and varying the depth. supplied with two bearings.
See offerGives a clean finish to abrasive materials such as chipboard, mdf, plywood and certain hardwoods. for housing, grooving and mortising.
See offerReduction sleeve is used to reduce the collet size to take cutters with smaller shanks. should only be used as a stop-gap, as the the correct size collet is recommended.
See offerCreates a corner bead with a step. by making a second pass at 90 degrees a full corner bead can be cut.
See offerThe classic method of producing cabinet panelled door and drawer fronts is made easy with these profile scriber sets. with the combination type, components are re-arranged on the arbor to cut the profile or the scribe.
See offerA range of tungsten carbide tipped circular sawblades designed for a professional finish in soft wood, hard wood, plasterboard, stone fibre board and particle board. reamed bore to ensure precise fit to spindle.
See offerFor accurate guiding of router, saws and jigsaws. integral clamping jaws and a locking lever provide a quick way of clamping the guide batten.
See offerSolid carbide replaceable blades. tool body remains in place when changing blades, thus reducing down-time.
See offerIdeal for producing nosings and attractive edges. specifications: • d=50.
See offerIdeal for posts and newel caps for stairs. specifications: • d1=25.
See offerPanel raiser cutters for producing the panel for cabinet panelled doors. the tool is fitted with a back cutter to ensure a maximum panel tongue thickness of 6.
See offerTo create profiles on face or edge of drawer fronts and cabinet doors. specifications: • d=3/4 inch • d=19.
See offerThe classic method of producing cabinet panelled door and drawer fronts is made easy with the profile scriber set. the components are rearranged on the arbor to cut the profile or the scribe.
See offerA one piece bearing guided set. parts are inter-changed on the arbor to alter the set-up.
See offerA tapered plug ensures an exceptionally tight fit is achieved. tapered plug cutters with tungsten carbide tips will produce many hundreds of plugs before resharpening is required.
See offerFor trimming and bevelling timber, lippings and plastic laminate edges or any shaping applications. self-guiding trimmer with bearings mounted on end of cutter.
See offerThese are ideal for engraving and decorative panel work. made with solid tungsten carbide inserts, with two flutes.
See offerSmall solid guide pin can follow more intricate shapes in contrast to bearing guided cutters. d: 29.
See offerGives a clean finish to abrasive materials such as chipboard, mdf, plywood and certain hardwoods. for housing, grooving and mortising.
See offer