Monument gas test
1-1 of 19 results

Monument Gas Test Gauge 300mm

Monument gas test gauge is made from tough plastic. used both for testing pipework installations with air for leaks before the introduction of gas and for checking and setting correct gas pressures on domestic and commercial appliances.

Monument Monument 30mb Gas Test Gauge

Made in the united kingdom!a 30mb gauge for testing both domestic & commercial gas appliances and pipe work.

Price Cuts Monument Mains Pressure Test Kit

Uk made! a specially designed gauge for testing, and displaying, mains water pressure.

Monument Monument 1m Replacement Gas Test Hose

A 1 metre length of standard gas hose, for use with gas test gauges..

Monument 257C Gas Test Gauge 30mb 300mm (12in)

Monument gas test gauge is made from tough plastic used both for testing pipework installations with air for leaks before the introduction of gas and for checking and setting correct gas pressures on domestic and commercial appliances extruded cover slides off and may be clipped over the base for standing the tool vertically during use hanging tab permits vertical hanging from suitable protrusions marked in millibars the scale adjusts for zeroing water level plastic u tube.

Monument Gas Test Gauge 600mm

Monument 1730X Orange Hose For Gas Test Gauges 2m

Monument Gas Test Gauge 1200mm

Monument 1732D Tapered Pressure Test Nipples 1/8" BSP

Monument 1368U 2 Piece Test Plug Set

Monument 1368U Test Plug Set of 2 (1 x 15 & 22mm)

The monument mon1368 1368u 2 piece test plug set is used for blocking off small pipes such as copper pipes for dry testing prior to commissioning they cannot be used for air testing purposes by themselves 2 plugs supplied 1 x 1370b 15mm test plug 1 x 1371e 22mm test plug.

Monument 1369X Test Plug Set of 6 15/22/28mm

This monument set of 6 test plugs contains the following small bore test plugs 2 x 1370b 15mm test plug 2 x 1371e 22mm test plug 2 x 1372h 28mm test plug used for blocking off small pipes such as copper pipes for dry testing prior to commissioning cannot be used for air testing purposes by themselves.

Monument 1732D Tapered Pressure Test Nipples 1/8in BSP

Test nipples screw into gas meters to enable connection to a gas test gauge the hexagon screw shuts off supply to the gauge 18in bsp thread.

Monument 1374N Drain Test Plug 38mm (1.1/2in)

Monument drain testing plugs are durable quality flexible drain plug for the plugging of drains and pipes this plug is easy to use and are available in various sizes fitted with removable top caps and rubber rings these plugs are easy to use just place in the pipe end that is being repaired or replaced and simply turn the wing nut knob this will depress the rubber cone this will make it expand to seal pipe or tube end with a water tight seal.

Monument 1368U Test Plug Set of 2 (1 x 15 & 22mm)

The monument mon1368 1368u 2 piece test plug set is used for blocking off small pipes such as copper pipes for dry testing prior to commissioning. they cannot be used for air testing purposes by themselves.

Monument 1376T Drain Test Plug 50mm (2in)

Monument drain testing plugs are durable, quality flexible drain plug for the plugging of drains and pipes. this plug is easy to use and are available in 3 and 4-inch versions.

Monument 258F Gas Test Gauge 60mb 600mm (24in)

Monument gas test gauge is made from tough plastic. used both for testing pipework installations with air for leaks before the introduction of gas and for checking and setting correct gas pressures on domestic and commercial appliances.

Monument 48GTG Gas Test Gauge 120mb 1200mm (48in)

Monument gas test gauge is made from tough plastic. used both for testing pipework installations with air for leaks before the introduction of gas and for checking and setting correct gas pressures on domestic and commercial appliances.

Monument 259I Gas Test Gauge 90mb 900mm (36in)