Brands

Low cycle fatigue
1-1 of 28 results

High-Cycle Metal Fatigue

High-Cycle Metal Fatigue

243.09 €

Erscheinungsdatum: 04.05.

See offer
low cycle fatigue - Tylko w Legimi możesz przeczytać ten tytuł przez 14 dni za darmo.

low cycle fatigue - Tylko w Legimi możesz przeczytać ten tytuł przez 14 dni za darmo.

263.64 €

This publication aims to provide to the designer a method for sizing, as first approximation, of upper mount cabin shock-absorber. it determines some possible geometries, then it uses the finite elements analysis and the low cycle fatigue approach to choose possible solutions.

See offer
Experimental Investigation of Crack Initiation in Face-Centered Cubic Materials in the High and Very High Cycle Fatigue Regime

Experimental Investigation of Crack Initiation in Face-Centered Cubic Materials in the High and Very High Cycle Fatigue Regime

44.00 €

This book investigates the fatigue mechanisms and crack initiation of ni, al and cu on a small-scale in the very high cycle fatigue regime by means of innovative fatigue experimentation. a novel custom-built resonant fatigue setup showed that the sample resonant frequency changes with increasing cycle number due to fatigue damage.

See offer
High Cycle Fatigue of Al and Cu Thin Films by a Novel High-Throughput Method

High Cycle Fatigue of Al and Cu Thin Films by a Novel High-Throughput Method

41.00 €

In the last two decades, the reliability of small electronic devices used in automotive or consumer electronics gained researchers attention. thus, there is the need to understand the fatigue properties and damage mechanisms of thin films.

See offer
A novel micro-mechanical model for prediction of multiaxial high cycle fatigue at small scales

A novel micro-mechanical model for prediction of multiaxial high cycle fatigue at small scales

39.00 €

The grain microstructure and damage mechanisms at the grain level are the key factors that influence fatigue of metals at small scales. this is addressed in this work by establishing a new micro-mechanical model for prediction of multiaxial high cycle fatigue (hcf) at a length scale of 5-100μm.

See offer
High-Cycle Metal Fatigue - From Theory to Applications

High-Cycle Metal Fatigue - From Theory to Applications

95.33 €

This book is devoted to the high-cycle fatigue behaviour of metal components, thus covering essential needs of current industrial design. the new developments included in the book rely on the use of the mesoscopic scale approach in metal fatigue and allow the specific handling of such difficult fatigue problems as multiaxial, non-proportional loading conditions..

See offer
Experimentelle Optimierung eines High-Cycle-Fatigue-Tests - Auslegung, Konstruktion und FE-Analyse einer variablen Düse zur experimentellen Optimierung des Airjettests

Experimentelle Optimierung eines High-Cycle-Fatigue-Tests - Auslegung, Konstruktion und FE-Analyse einer variablen Düse zur experimentellen Optimierung des Airjettests

45.95 €

In der triebwerkstechnik ist die theoretische und experimentelle untersuchung von schwingungen von großer wichtigkeit, da letztere zu strukturellen schäden und zum bauteilversagen führen können. der ermüdungstest, der in dieser arbeit thematisiert wird, nutzt zur schwingungsanregung einer schaufel die aeroelastische instabilität flattern aus.

See offer
Strengthening of R/C structures under high cycle fatigue loadings - using Steel Reinforced Inorganic Polymer (SRiP)

Strengthening of R/C structures under high cycle fatigue loadings - using Steel Reinforced Inorganic Polymer (SRiP)

59.00 €

Typical strengthening systems for reinforced concrete structures are based on the use of organic matrices and carbon or glass fibers. in this book a new type of strengthening system is investigated and proposed.

See offer
A CDM model on high cycle fatigue under weld-induced residual stresses

A CDM model on high cycle fatigue under weld-induced residual stresses

35.90 €

A nonlinear continuum damage mechanics (cdm) model for multiaxial high cycle fatigue which incorporates the cyclic plasticity constitutive equation is developed in the finite element (fe) framework. fe simulation of t-joint fillet welding is first performed to identify welding residual stresses employing sequentially coupled three-dimensional (3-d) thermo-mechanical fe formulation.

See offer
Fatigue Performance and Life-Cycle Prediction of Existing Bridges - Dynamic Effects from Combined Random Loads of Winds and Vehicles

Fatigue Performance and Life-Cycle Prediction of Existing Bridges - Dynamic Effects from Combined Random Loads of Winds and Vehicles

59.00 €

During the life cycle of bridges, varied amplitude of stress ranges on structural details are induced by the random traffic and wind loads. the progressive deteriorated road surface conditions might accelerate the fatigue damage accumulations.

See offer
Monotonic and Ultra-Low-Cycle Fatigue Behaviour of Pipeline Steels - Experimental and Numerical Approaches

Monotonic and Ultra-Low-Cycle Fatigue Behaviour of Pipeline Steels - Experimental and Numerical Approaches

151.78 €

This book covers the development of innovative computational methodologies for the simulation of steel material fracture under both monotonic and ultra-low-cycle fatigue. the main aspects are summarised as follows: i) database of small and full-scale testing data covering the x52, x60, x65, x70 and x80 piping steel grades.

See offer

Related searches