Kirkpatrick 153 iron
1-1 of 11 results

Single panic latch

• the startec panic exit latch is designed to satisfy the requirements of a panic application:- fire rated for imber and steel doors- suitable for single doors and the active leaf (1st opening) of a rebated double door set• 180 x 55 x 98 mm (height x width x depth, excluding bar)• suitable for doors up to 1300mm wide• unit is supplied as handed,...

Single panic bolt

• the startec panic exit bolt is designed to satisfy the requirements of a panic application- fire rated for timber and steel doors- suitable for single doors and the inactive leaf (2nd opening) of a rebated double door set• 180 x 55 x 98 mm (height x width x depth, excluding bar)• suitable for doors up to 1300 mm wide and 2500 mm high• unhanded•...

Outside access device with lever and Euro profile cylinder

• 155 x 135 x 70 mm (including lever)• suitable for use as outside access device for startec items shown in related products• easily re-handed on site for right and left applications• supplied with a 40 mm euro profile single cylinder in polished nickel• suitable for use with side fixed euro cylinders for easy change on site• bolt through...

Outside access device with knob and Euro profile cylinder

• 175 x 55 x 88 mm (including knob)• suitable for use as outside access device for startec items shown in related products• easily re-handed on site for right and left applications• supplied with a 40 mm single euro profile cylinder, polished nickel• suitable for use with side fied euro cylinders for easy change on site• bolt through fixing...

Escutcheon, profile cylinder, satin aluminium finish

• concealed fixing• fixing screws included• aluminium.

M10 Plinth Adjusting Screw - 45mm Length

• with adjustable baseplate• slot in screw tip provides simple adjustment of plinth height using a screw driver• galvanised steel.

Spare parts for pull-out waste bin

Metal Circular 'Depress Lever To Lock' Door Lock Sign

• component part for 911.78.

Cylinder pull, suits Euro profile cylinder

• to suit profile cylinders• face fixing• fixing screws included• aluminium.

Cabinet Carcass Supporting Braces for Kitchen Units & Appliance Housings

These housing braces are designed to support cabinet carcass walls to regain strength in areas that have had additional installation work done, which may have compromised the structural integrity of the units.this is most common when installing built-in appliances, and the need to remove the unit base etc can harm the structure of the unit...

Self-Adhesive Heat Reflective Sheet

• 1000 x 600 x 0.1 mm (length x width x thickness)• for worktops• to protect the underside of worktops from radiant heat given of by cookers and dishwashers• self adhesive.

Heat reflective tape

• 3000 x 50 x 0.1 mm (length x width x thickness)• for worktops• to protect the edges of the worktop hob cut out from radiant heat given off by the hob• self adhesive.

Plinth Top Section - Dowel Mounting

• with Ø 10 mm or Ø 15 mm spreading dowel for fixing to underside of cabinet base• black plastic.

Pull-Out Recycling Bin Unit for Kitchen Cabinets, 20 Litres

Most modern kitchen these days are choosing to make the most of their space with built in storage. these pull out recycling bins are an ideal solution for anyone with a small kitchen or someone simply looking for a way to discreetly hide their waste until bin day.

Under-Sink Cabinet Base Liners, Grey Plastic

• with lip to cover carcase front edge• installed depth: 560 mm• aluminium-grey plastic.

Plastic 3 Compartment Detergent Holder

• plastic.

Press pad for diagonal wall units

• alternative to control switch• 70 x 140 mm• plastic.

Expanding insert, for spice jars and knives, to suit 500 mm deep drawer

• suitable for 400*-600 mm or 800-1000 mm drawer widths (*450-600 mm if framed unit used)• insert has two layers - bottom layer slides out to fit drawer width• layers can be screw fixed together in prefered position using screw hole at front and back of drawer insert, if required• note: bottom layer only slides out in one direction, as shown•...

2.5m Cuttable Aluminium Cabinet Profile Grip

• length 2500 mm• aluminium silver.

Modular Screw with M4 Thead for 5mm Diameter Holes

• collared• for double sided installation in wood• with m4 thread, for insertion through Ø 5 mm series-drilled holes.

Steel Table Hinge for Front Flaps, 100mm x 32mm

• for table flaps or cabinet door front flaps• steel.

K Line Shelf Support for Glass & Wooden Shelves - Plug In, for 5mm Diameter Holes

• for glass or wooden shelves (for glass shelves order rubber pad 284.84.

Rubber Pad for K Line Shelf Support

• rubber pad for use with shelf support shown in related products• transparent plastic rubber.

Drawer Runners, Full Extension, 45kg Capacity

• 45 kg carrying capacity• hold-in feature holds drawer in• front disconnect (by pressing lever) for drawer removal• tolerance absorbtion tabs• 32 mm drilling pattern• breathing tabs, easy installation• zinc plated steel.

Steel Table Hinge for Front Flaps, 80mm x 28mm

• for table flaps or cabinet door front flaps• steel.

Finger Fix Vorfront and Infront fittings

Apollo® Slab Tech installation and maintenance kit

• for use with solid worktop• kit includes:- 1x surface cleaner (spray)- 1x pair of disposable gloves- 2x white cloth- 1x dark, 1x maroon and 1x white nylon abrasive pads- 1x 100, 1x 150 and 1x 220 grit sanding discs- 1x pack of alcohol wipes- 1x glue gun adaptor- 1x roll aluminium tape- 1x pair self adhesive aluminium foil sheets- 1x instruction...

Magnetic Catch - Screw Fixing, Fixed Catch, 6kg Pull

• catch: fixed• counterpiece: floating• screw fixing• steel.

Pocket sliding door handle

• aluminium.