Draper spray trigger
1-1 of 7 results

Draper Bench Mounted Spindle Moulder, 1500W

Features powerful 1500w motor variable speed adjustable spindle height left and right table extension wings 60 635 80 120 and 127mm bushes supplied dust extraction port with 100mm adaptor supplied with rear fence; back plates; chuck guard; non-return guides; 4m approx cable and approved plug display carton specifications spindle speed  11500-24000rmin spindle travel  0-40mm table size  610 x 360mm table size with ext wings  1030 x 360mm weight  22kg no-volt switch.

Draper Wheel Nut Double Impact Socket Kit, 1/2" Sq. Dr. (4 Piece)

Expert quality three double - ended impact sockets size 17 19 and 21mm one end is hexagon 6pt and the other a reverse conical gripper thread for the removal of locking wheel nuts supplied with a 12 sq dr 75mm impact extension bar packed in a nylon wallet with hook and loop closure in display carton these kits should only be sold to bona fide garages and emergency service organisations.

Draper Universal Cooling System Vacuum Purge and Refill Kit

Expert quality dramatically reduces cooling system refill time by preventing air-locks thus avoiding time-consuming cooling system bleeding plugs into air line then attaches to the cooling system to create a vacuum filler hose is then connected allowing pre-mixed coolant to flow easily into the system supplied with gauge 13m of clear hose four adaptors and hose end filler packed in carrying case.

Draper Gravity Feed HVLP Air Spray Gun, 600ml

General purpose hvlp spray gun with aluminium body suitable for use with all paint types including water - based variable fan and fully adjustable flow spare nozzle needle and cap sets are available - see table display carton 1 x spray gun 1 x cleaning brush 1 x service spanner specifications fluid delivery rate  190-250mlmin fluid nozzle size  14mm operating air pressure  43psi 3 bar average air consumption  145cfm 400 lmin air inlet  14 bsp weight  0550kg.

Draper HVLP Air Spray Gun with Composite Body and Gravity Fed Hopper, 600ml

General purpose hvlp spray gun with lightweight composite body suitable for use with all paint types including water - based variable fan and fully adjustable flow spare nozzle needle and cap sets are available - see table display carton 1 x spray gun 1 x cleaning brush 1 x service spanner specifications fluid delivery rate  190-250mlmin fluid nozzle size  14mm operating air pressure  43psi 3 bar average air consumption  145cfm 400 lmin air inlet  14 bsp weight  0375kg.

Draper Gravity Feed HVLP Air Spray Gun, 100ml

General purpose hvlp spray gun with aluminium body suitable for use with all paint types including water - based variable fan and fully adjustable flow spare nozzle needle and cap sets are available - see table display carton 1 x spray gun 1 x cleaning brush 1 x service spanner specifications fluid delivery rate  70-110mlmin fluid nozzle size  10mm operating air pressure  43psi 3 bar average air consumption  8cfm 226 lmin air inlet  14 bsp weight  0276kg.

Draper Gravity Feed HVLP Composite Body Air Spray Gun, 100ml

General purpose hvlp spray gun with lightweight composite body suitable for use with all paint types including water - based variable fan and fully adjustable flow spare nozzle needle and cap sets are available - see table display carton 1 x spray gun 1 x cleaning brush 1 x service spanner 1 x cup filter 1 x connector specifications fluid delivery rate  70-110mlmin fluid nozzle size  10mm operating air pressure  30psi 2 bar average air consumption  8cfm 226 lmin air inlet  14 bsp weight  18kg.

Draper Mitre Box with Clamping Facility, 367 x 116 x 70mm

Expert quality moulded from tough high quality plastic to give exceptional rigidity two sprung clamps for holding workpiece one 45° 225° and 90° guides on the two edges with a side on 45° for larger sections of materials two bench edge stops on the underside to prevent movement whilst working the base has two countersunk slots for permanent fixing to bench sold loose.

Draper Expert Fibreglass Short Shaft Sledge Hammer, 1.8kg/4lb

Expert quality polished face solid forged head from fine grain high carbon steel correctly hardened and tempered with a lacquer coating for rust protection solid fibreglass core shaft fitted with shock absorbing pptpr grip sold loose.

Draper Expert Fibreglass Shaft Sledge Hammer, 3.2kg/7lb

Expert quality forged from fine grain carbon steel correctly hardened and tempered with a polished and lacquered head fibreglass shaft fitted with comfortable shock-absorbing rubber grip sold loose.

Draper Expert Fibreglass Shaft Sledge Hammer, 4.5kg/10lb

Expert quality forged from fine grain carbon steel correctly hardened and tempered with a polished and lacquered head fibreglass shaft fitted with comfortable shock-absorbing rubber grip sold loose.

Draper Expert Fibreglass Shaft Sledge Hammer, 6.4kg/14lb

Expert quality forged from fine grain carbon steel correctly hardened and tempered with a polished and lacquered head fibreglass shaft fitted with comfortable shock-absorbing rubber grip sold loose.

Draper Felling Axe with Fibreglass Shaft, 680g

Expert quality forged from fine grain carbon steel correctly hardened and tempered with a polished head fibreglass shaft fitted with comfortable shock-absorbing rubber grip sold loose standards manufactured generally in accordance with bs2945.

Draper Felling Axe with Fibreglass Shaft, 1.6kg

Expert quality forged from fine grain carbon steel correctly hardened and tempered with a polished head fibreglass shaft fitted with comfortable shock-absorbing rubber grip sold loose standards manufactured generally in accordance with bs2945.

Draper Felling Axe with Fibreglass Shaft, 2kg

Expert quality forged from fine grain carbon steel correctly hardened and tempered with a polished head fibreglass shaft fitted with comfortable shock-absorbing rubber grip sold loose standards manufactured generally in accordance with bs2945.

Draper Fibreglass Shaft Log Splitting Maul, 2.7kg

Expert quality forged from fine grain carbon steel correctly hardened and tempered with a polished head fibreglass shaft fitted with comfortable shock-absorbing rubber grip sold loose standards manufactured generally in accordance with bs876 and bs 2945.

Draper Yankee Pattern Hand Axe, 680g

Expert quality forged carbon steel head hardened and tempered accurately ground edges lacquered finish and edge cover straight grained hickory shaft securely fixed with timber wedge and steel ring sold loose standards manufactured generally in accordance with bs 2945.

Draper Yankee Pattern Felling Axe, 1.1kg

Expert quality finely balanced long-handled axe with hardened and tempered forged carbon steel head with accurately ground edges lacquered finish and edge cover straight grained hickory shaft securely fixed with timber wedge and steel ring sold loose standards manufactured generally in accordance with bs 2945.

Draper Yankee Pattern Felling Axe, 2kg

Expert quality finely balanced long-handled axe with hardened and tempered forged carbon steel head with accurately ground edges lacquered finish and edge cover straight grained hickory shaft securely fixed with timber wedge and steel ring sold loose standards manufactured generally in accordance with bs 2945.

Draper Tilt & Clamp Fold Down Workbench, 600mm

Portable workbench with dual clamping action and 24 holes for work clamping dogs special tilting two - piece mdf worktops allow 0° 45° and 90° clamping folds flat for secure storage sturdy legs manufactured from strong box section steel maximum clamping width with dogs 280mm supplied with four plastic clamping dogs and fixings weight 61kgapprox flat packed with assembly instructions display carton.

Draper Flexible Sanding Sponge, Fine/Medium Grit

Dense foam sponge with two different grades of abrasive grit ideal for sanding angles contoured or flat surfaces overall size 102 x 70 x 23mm display packed.

Draper Flexible Sanding Sponge, Medium/Coarse Grit

Dense foam sponge with two different grades of abrasive grit ideal for sanding angles contoured or flat surfaces overall size 102 x 70 x 23mm display packed.

Draper Fully Flexible Magnetic Pick up Tool, 610mm

Fully flexible plated stem with plastic grip and powerful magnetic end display packed.

Draper Elora Imperial Flare Nut Spanner, 7/16 x 1/2"

Professional quality manufactured from chrome vanadium steel hardened tempered and chrome plated for corrosion protection jaws set at 15° for use on compression nuts fitted on petrol and diesel injection pipes hydraulic gas or refrigeration systems sold loose standards manufactured to din 3118 specifications.

Draper Fixed Shaft Inspection Mirror, 370mm

Fully flexible head with mirror 55mm diameter to give good visibility in concealed areas plated finish with plastic grip display packed.

Draper Mitre Box, 360 x 110 x 60mm

Moulded from tough high quality plastic to give exceptional rigidity two 45° and one 90° guides on the two edges with a side on 45° for larger sections of materials the base has two countersunk slots for permanent fixing to bench sold loose.

Draper Double Ended Valve Grinding Stick, 240mm

Recycled pvc shaft with 19mm and 22mm diameter rubber suction ends display packed.

Draper Surface Mounted Water Pump, 1100W

Self - priming pump with 25mm output aperture suitable for home and garden applications waterproof onoff switch thermal overload protection long life double insulated impellers of corrosion and rustproof construction supplied with one 25mm diameter output elbow and fitted with 15mapprox cable and approved plug specifications voltage 230v maximum output 76lmin maximum head height 45m motor 1100w float switch na output aperture diameter 25mm max particle diameter 1mm hose adaptor diameter 25mm weight 86kg.

Draper Countersink Bit, 12mm

Manufactured from special tool steel hardened and tempered to 55hrc for long life the 90° head incorporates a single finely ground fast cutting edge shank 6mm diameter suitable for use with hand or power drills on hard or softwood and plastics display packed.

Draper Countersink Bit, 16mm

Manufactured from special tool steel hardened and tempered to 55hrc for long life the 90° head incorporates a single finely ground fast cutting edge shank 6mm diameter suitable for use with hand or power drills on hard or softwood and plastics display packed.

Draper Bucket, 14.8L, Yellow

Good quality polyethylene with metal carrying handle sold loose.

Draper Steel Staples, 6 x 10mm (Pack of 1000)

Draper Steel Staples, 8 x 10mm (Pack of 1000)