L-thonig-high-quality-flux-7-5g-lothonig-811114-89-p-high-quality-flux-7-5g-from-lothonig-is-ideal-for-exceptionally-clean-reliable-soldering-without-damage-to-materials-p-p-the-use-of-flux-paste-can-accelerate-the-soldering-process-while-the-flux-can-also-be-used-with-metals-that-are-difficult-to-solder-brass-steel-konstantan-and-oxidised-parts-p-l-thonig-811114-89-high-quality-flux-7-5g.
See offerRothenberger-brazing-paste-rothenberger-035610e-p-this-brazing-paste-from-rothenberger-is-ideal-for-use-with-silver-containing-brazing-solder-and-all-base-materials-made-from-steel-copper-and-copper-alloys-brass-and-red-bronze-p-rothenberger-035610e-brazing-paste-lp-5-710-c-160g.
See offerRothenberger-solder-wire-rothenberger-045255-p-this-high-quality-solder-wire-from-rothenberger-can-be-used-with-solder-paste-p-rothenberger-045255-fittings-solder-3-sn97cu3-3mm-250g.
See offerRona-8-piece-diamond-grinding-and-blade-set-rona-6-disques-pour-couper-et-limer-p-this-high-quality-set-from-rona-includes-a-selection-of-diamond-coated-blades-and-grinding-wheels-supplied-in-a-transparent-plastic-box-p-rona-diamond-grinding-blade-set-8-piece.
See offerStannol low voltage micro soldering iron 12v, 8w - stannol 203430, this miniature soldering iron is ideal for delicate soldering jobs in electronics and modelling, but is also suitable for for light general repairs on cars, boats, caravans, radios, tvs, computers, calculators, etc. its small size makes it easy to take anywhere.
See offerStannol low voltage micro soldering iron 12v, 8w - stannol 203440, a replacement soldering tip for the stannol 12v micro soldering iron, 49-3166. stannol 203440 soldering tip for micro soldering iron.
See offerRona-carbide-cutter-bits-rona-814528-p-this-toothed-carbide-cutter-bit-from-rona-is-made-to-the-highest-industrial-standards-and-is-ideal-for-use-in-high-speed-multifunction-tools-p-rona-814528-carbide-cutter-bit-toothed.
See offerStannol-fine-fluxer-350-flux-pen-stannol-830333-p-the-stannol-fine-fluxer-350-flux-pen-is-ideal-for-repairs-and-hand-mounting-of-smd-components-on-densely-populated-boards-and-ceramic-substrates-p-stannol-830333-fine-fluxer-350-flux-pen-8ml.
See offerC r clarke 500 & 920 hot wire strip heaters - c r clarke 500, the c r clarke 500 hot wire strip heater is designed to locally heat thermoplastic sheet materials of thicknesses between (typically) 0.5mm and 6.
See offerC r clarke 500 & 920 hot wire strip heaters - c r clarke 920, the c r clarke 920 hot wire strip heater is designed to locally heat thermoplastic sheet materials of thicknesses between (typically) 0.5mm and 6.
See offerC r clarke s and d range single/double sided hot wire strip heaters - c r clarke 600s, this 600mm single-sided hot wire strip heater provides a quick and efficient solution for the local heating of thermoplastic sheets up to 10mm (3/8in.) thick to allow bending.
See offerC r clarke s and d range single/double sided hot wire strip heaters - c r clarke 600d, this 600mm double-sided hot wire strip heater provides a quick and efficient solution for the local heating of thermoplastic sheets up to 10mm (3/8in.) thick to allow bending.
See offerC r clarke s and d range single/double sided hot wire strip heaters - c r clarke 1000s, this 1000mm single-sided hot wire strip heater provides a quick and efficient solution for the local heating of thermoplastic sheets up to 10mm (3/8in.) thick to allow bending.
See offerC r clarke s and d range single/double sided hot wire strip heaters - c r clarke 1000d, this 1000mm double-sided hot wire strip heater provides a quick and efficient solution for the local heating of thermoplastic sheets up to 10mm (3/8in.) thick to allow bending.
See offerC r clarke s and d range single/double sided hot wire strip heaters - c r clarke 1500s, this 1500mm single-sided hot wire strip heater provides a quick and efficient solution for the local heating of thermoplastic sheets up to 10mm (3/8in.) thick to allow bending.
See offerC r clarke fj0600 / fj1000 / fj1500 folding jigs - c r clarke fj0600, this folding jig from c r clarke is a useful accessory to their range of strip heaters. the jig has a working length of 600mm and is adjustable from 160° obtuse to 30° acute.
See offerC r clarke triform 180 hot wire cutter & sculptor and accessories - c r clarke 900/32, 20swg nickel chrome (ni-chrome) wire as used in hot wire cutters and strip heaters. c r clarke 900/32 ni chrome wire 20swg x 10 metre roll.
See offerC r clarke triform 180 hot wire cutter & sculptor and accessories - c r clarke 180, the triform 180 from c r clarke is a 3-in-1 machine that cuts and sculpts expanded thermoplastic material as well as bending thermoplastic sheet up to 6mm thick.separate heating wires are used for line bending and sculpting, optimising performance in both modes.
See offerC-r-clarke-280-hot-wire-sculptor-c-r-clarke-280-p-the-c-r-clarke-280-hot-wire-sculptor-allows-you-to-accurately-cut-thermoplastic-foam-into-a-wide-range-of-shapes-its-adjustable-guides-accurately-place-the-material-and-its-wire-bow-protractor-accurately-sets-angles-to-produce-wedges-chamfers-and-cones-p-p-the-280-also-includes-a-hand-held-wire-loop-for-freehand-sculpting-p-p-a-pneumatic-foot-switch-energises-the-hot-wire-or-sculptor-tool-only-while-cutting-this-results-in-safer-oper.
See offerC r clarke dip coating equipment - c r clarke 120k, a comprehensive suite of dip-coating equipment comprising a fluidised bath model 300 on stand 300s with fluidised bath 150 and blower/suction unit 120. c r clarke fluidised bath suite 120k.
See offerC r clarke dip coating equipment - c r clarke 120, a low pressure, high volume air blower, suitable for c r clarke fluidised baths. c r clarke blower unit 120.
See offerC r clarke dip coating equipment - c r clarke 150, the c r clarke 150 fluidised bath has a static volume of 5 litres and is designed to be used on top of a model 300 fluidised bath, thereby reducing the amount of powder required.this is ideal for small quantities of a second colour, or for coating small items.
See offerC r clarke dip coating equipment - c r clarke 150r, the c r clarke 150r fluidised bath has a static volume of 5 litres and can be powered from the pressure outlet of a suitable vacuum forming machine or a blower / suction unit type 120, 34-8538, (sold separately). c r clarke fluidised bath 150r.
See offerC r clarke dip coating equipment - c r clarke 150/04, spare or replacement porous membrane for use with c r clarke 5 litre fluidised baths. c r clarke 150/04 porous membrane 150 x 150mm.
See offerC r clarke dip coating equipment - c r clarke 300, the c r clarke 300 fluidised bath has a static volume of 50 litres and is powered by a blower / suction unit type 120, 34-8538, (sold separately). c r clarke fluidised bath 300.
See offerC r clarke dip coating equipment - c r clarke 300s, a stand with castors to hold and transport c r clarke fluidised baths 300 & 150 and a blower/suction unit 120. c r clarke fluidised bath stand 300s.
See offerC r clarke schred waste plastic recycling equipment - c r clarke r25l, c r clarke's r25l schredder is a 230v mains (single-phase) powered granulator that converts waste plastics into a chipped material that can be re-processed. c r clarke r25l schredder 230v - single phase.
See offerC r clarke schred waste plastic recycling equipment - c r clarke r25, c r clarke's r25 schredder is a 400v mains (3-phase) powered granulator that converts waste plastics into a chipped material that can be re-processed. c r clarke r25 schredder 400v - three phase.
See offerC r clarke schred waste plastic recycling equipment - c r clarke r30, c r clarke's r30 schred press uses heat and pressure to reform plastic granules into usable sheets. it can be used on a workbench or with the optional r30s stand (34-8566).
See offerC r clarke schred waste plastic recycling equipment - c r clarke r30s, an optional stand for c r clarke's r30 sheet press, 34-8564. c r clarke r30s sheet press stand.
See offerC r clarke schred waste plastic recycling equipment - c r clarke r30t2, a ptfe coated cassette for use with the c r clarke r30 sheet press, 34-8564.when filled with chipped recycled plastic, then heated and pressed in the sheet press, the cassette moulds a 'new' plastic sheet.
See offerC r clarke schred waste plastic recycling equipment - c r clarke r30sc, an optional cooling system for the c r clarke r30s stand (34-8566). c r clarke r30sc cooling system (optional extra for r30s stand).
See offerC r clarke schred waste plastic recycling equipment - c r clarke r30m01, an optional frisbee mould for use with c r clarke's r30 sheet press, 34-8564. c r clarke r30m01 frisbee mould for r30 schred press.
See offerC r clarke 1210, 280 x 204mm vacuum former - c r clarke 1210 230v, c r clarke's 1210 quickly efficiently and consistently produces professional quality, high definition vacuum formings on a small scale as required by model makers, development engineers and students. c r clarke 1210 230v vacuum former.
See offerC r clarke 1210, 280 x 204mm vacuum former - c r clarke 1210 115v, c r clarke's 1210 quickly efficiently and consistently produces professional quality, high definition vacuum formings on a small scale as required by model makers, development engineers and students. c r clarke 1210 115v vacuum former.
See offer