Arctic Cooling Arctic freezer 34 esports grey/white
- Compatible with Intel ® & AMD ® sockets
- Thermal coating and evenly spread heat pipes for optimal heat dissipation
- Broad RPM Range for highest performance and low noise level
- Focused airstream for improved cooling performance
- 0 dB mode: silent passive mode when PWM signal is below 5 %
- PWM Sharing Technology (PST) regulates fan speed synchronously
- Extended life span and less vibrations with new motor technology
- Secure hold with backplate
- MX-4 thermal paste included
- Tower Cooler
- Cooling Method Active
- Max
- Revolution 2
- 100 rpm
- Total Height 157 mm
Product description
Freezer 34 eSports
Tower CPU Cooler with BioniX P-Fan
The ARCTIC Freezer 34 eSports is a Tower CPU cooler with a 120 mm BioniX P-fan. It is a powerful cooling solution for AMD ® & Intel ® CPU and recommended for CPU with a TDP up
to 200 W. The pressure-optimised fan creates a focused airstream for increased performance. A broad RPM range enables highest performance as well as low noise levels. With high-quality bearings and a new motor-generation, the fan is very quiet, efficient and durable. It offers a 0 db mode, which switches the fans to a silent passive mode with the PWM signal below 5 %.
Excellent Price-Performance Ratio
With a powerful, pressure-optimised BioniX P-fan and its updated, thermal-coated heatsink, the Freezer 34 eSports offers a lot of performance for a fair price. In internal tests levelled to 28 dB(A), the Freezer 34 eSports was able to surpass many competitors, even much bigger and more expensive double tower cooling solutions. More information about our performance test and the max.
Better Cooling - Better Performance
No thermal throttling on your CPU - even at high turbo clock speeds and overclocking, the Freezer 34 eSports cools quietly, so you can reach the maximum FPS with minimal noise levels for the smoothest possible gaming experience.
Improved Heat Dissipation
Evenly spread direct-touch heat pipes and an optimised heat sink design with 54 cooling fins lead to ideal heat dissipation for the Freezer 34 eSports.
Thermal Coating
A thermal coating creates micro-turbulences with a special surface structure. Combined with offset heat pipes this leads to an optimised heat-dissipation and to an increased cooling performance.
High Performance for High-End CPU
The contact surface of the Freezer 34 eSports heat pipes does not cover the full heatspreader, but, more importantly, is right where the processor DIE is and covers even the largest versions (18 core) completely.
Easy Installation & Secure Hold
Fast and easy to install and extremely reliable, the Freezer 34 eSports mounting system is compatible with Intel and AMD sockets. Thanks to a backplate and its low weight, the Freezer 34 eSports is not only foolproof to install, but also absolutely transport safe.
Optimal RAM Compatibility
Thanks to its compact dimensions of only 124 x 157 x 88 mm, there are almost no restrictions when using RAM modules. Even RAM modules with larger heat sinks can be mounted without any issues and are not blocked by the CPU Cooler.
Multilingual Manuals
We offer a regularly updated user manual in many languages conveniently at your fingertips anywhere and anytime. Put the QR code sticker somewhere convenient and never waste time again looking for product instructions.
MX-4 Thermal Paste Included
The high-performance MX-4 thermal compound is included and ensures the best cooling results.
Product information
Performance
| Suitable location | Processor |
|---|---|
| Type | Air cooler |
| Fan diameter | 12 cm |
| Supported processor sockets | LGA 1150 (Socket H3), LGA 1151 (Socket H4), LGA 1155 (Socket H2), LGA 1156 (Socket H), LGA 2011 (Socket R), LGA 2011-v3 (Socket R), LGA 2066, Socket AM4 |
| Rotational speed (min) | 200 RPM |
| Rotational speed (max) | 2100 RPM |
| Noise level (high speed) | 28 dB |
| Noise level | 0.5 sone |
| Pulse-width modulation (PWM) support | Yes |
| Bearing type | Fluid Dynamic Bearing (FDB) |
Design
| Product colour | Grey, White |
|---|---|
| Number of fans | 1 fan(s) |
| Number of fins | 54 |
| Fins material | Aluminium |
| Number of heat pipes | 4 |
Power
| Rated current | 0.13 A |
|---|---|
| Thermal Design Power (TDP) | 200 W |
Weight & dimensions
| Width | 88 mm |
|---|---|
| Depth | 124 mm |
| Height | 157 mm |
| Weight | 627 g |
| Heat pipes diameter | 6 mm |
| Fins thickness | 0.4 mm |
| Package width | 127 mm |
| Package depth | 100 mm |
| Package height | 170 mm |
| Package weight | 834 g |
Packaging content
| Mounting kit | Yes |
|---|---|
| Screws included | Yes |
| Number of screws | 2 |
Other features
| Fan rated voltage | 12 V |
|---|---|
| Thermal grease | Yes |
Logistics data
| Harmonized System (HS) code | 84733080 |
|---|
